TURBOCHARGER & COMPONENTS. 2. 0 liter. M6x14mm. M6x20mm.. 2012 Ford Edge 2.0L EcoBoost A/T AWD Limited Sport Utility

2.0 LITER. to 5/12.

2.0 LITER.

2.0 LITER. Turbocharger stud. Fastener with threads on both ends to either attach the exhaust manifold to the cylinder head or the exhaust pipe to the exhaust manifold. Part cannot be reused/reinstalled. Turbocharger Stud. Exhaust. Mnfd w/converter. Preconverter. Support bracket. Turbocharger. Water inlet tube.

2.0 LITER. Turbocharger washer.

2.0 LITER. Turbocharger nut. A solid metal or plastic block with a threaded hole in the center which is used to tighten or adjust the Engine Oil Filter Adapter. A solid metal or plastic block with a threaded hole in the center which is used to tighten or adjust the Turbocharger Heat Shield. Part cannot be reused/reinstalled. Turbocharger Nut. Mount Heat Shield. Bracket. Engine Oil Filter Adapter. Water inlet tube.

2.0 LITER. Heat shield. A Heat reflective barrier to prevent items from coming in contact with the hot Exhaust Manifold. Turbocharger Mount Heat Shield.

2.0 LITER. Heat shield screw. A threaded rod with a drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Driveshaft Center Support Bracket to its Mounting surface. A threaded rod with a drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Starter Shield to it's Mounting point. A threaded rod with a drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Turbocharger Heat Shield to a Mounting point. Nut that secures the drive shaft Center Support. Drive Shaft Center Support Nut. Prop Shaft Center Support. Starter Heat Shield. Turbocharger Heat Shield.

2.0 LITER. Oil feed tube. Exhaust Manifold. From 11/19/2015. Incl.Turbocharger. Line used to transmit oil amongst the turbo, intercooler and engine. To 11/19/2015. inlet. Exhaust Manifold. PIPE -. Turbocharger Line.

2.0 LITER. At Engine. Copper Seal. Feed. Turbocharger Coolant Line Washer. Turbocharger Oil Line Gasket. Turbocharger Oil Line O-Ring. Coolant. COPPER. Feed. Gasket. inlet. O - Ring. Included with: Oil Feed Tube, Oil inlet Tube, Water outlet.

2.0 LITER. Oil feed tube bolt.

2.0 LITER. Filter.

2.0 LITER. Oil return tube.

2.0 LITER. All Required. Return. Turbocharger Coolant Line Gasket. Turbocharger Oil Line Gasket. Coolant. hose. outlet. Return.

2.0 LITER. M6x14mm. Oil return tube bolt. PartQualifier: M6x14mm.

2.0 LITER. M6x20mm. Oil return tube bolt. PartQualifier: M6x20mm. All Required. Alternator Bracket Bolt. Bolt for the Brackets that hold the Radiator Hose. Bolt used to fasten the Engine Intake Manifold. Engine Camshaft Position Sensor Bolt. Engine Coolant Pipe Bolt. Engine Water Pump Pulley Bolt. Exhaust Manifold Heat Shield Bolt. Turbocharger Coolant Line Bolt. Turbocharger Oil Line Bolt.

2.0 LITER. Water inlet. A line that carries coolant from the engine through the turbocharger and back into the engine. Hoses carries permanent coolant, or antifreeze, throughout the engine, heater, and radiator.. pipe. tube. Engine. Turbocharger Line.

2.0 LITER. Water inlet gasket. Outlet. Turbocharger Coolant Line Gasket. Turbocharger Gasket. hose. pipe. Turbocharger Coolant Line. Included with: Inlet hose, Outlet tube, Water hose, Water Inlet, Water Inlet pipe, Water Inlet tube, Water Outlet.

2.0 LITER. Water inlet bolt. Turbocharger Coolant Line Bolt. Turbocharger Oil Line Bolt. BANJO. hose. outlet. pipe. tube. Turbocharger Coolant Line. Turbocharger Oil Line. Included with: Inlet hose, Oil inlet tube, Water inlet, Water inlet pipe, Water inlet tube, Water outlet.

2.0 LITER. Water outlet. A line that carries coolant from the engine through the turbocharger and back into the engine. Hoses carries permanent coolant, or antifreeze, throughout the engine, heater, and radiator. tube. CONNECTION -. Engine. Turbocharger Line.

2.0 LITER. Water outlet gasket. Outlet. Turbocharger Coolant Line Gasket. Turbocharger Gasket. hose. pipe. Turbocharger Coolant Line. Included with: Inlet hose, Outlet tube, Water hose, Water Inlet, Water Inlet pipe, Water Inlet tube, Water Outlet.

2.0 LITER. Water outlet bolt. A threaded rod with a drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Turbocharger Heat Shield to a mounting point. Turbocharger Coolant Line Bolt. Turbocharger Oil Line Bolt. Banjo. hose. inlet tube mount. Heat Shield screw. Outlet tube mount. Turbocharger Coolant Line. Turbocharger Oil Line. Included with: Outlet tube, Water hose, Water inlet, Water inlet tube, Water Outlet.